Interested
in the EP2J Series ?

General Information:
By changing the position of the contact position of the brush and the polished surface of the ring-shaped winding to change the turns ratio of the primary and secondary windings, the regulator that finally achieves the main purpose is called a ring regulator. Ring contact type electric voltage regulator is a large contact type electric voltage regulator, which is a replacement product of inductive voltage regulator. Appearance, weight, volume, efficiency, waveform, operation, installation and maintenance are better than the same power induction voltage regulator. Suitable for industrial and mining power, hospitals, national defense, scientific research and other departments as a continuously adjustable test power supply.


Working Conditions:
-The altitude does not exceed 1000m.
-Indoor use.
-The average relative humidity in the wettest month is below 90%, and the average minimum temperature in the month is 25℃.
Maximum ambient temperature +40℃.
Maximum daily average temperature +30℃
Maximum annual average temperature +20℃
Minimum temperature -5℃
-There should be no gas, steam, dust, dirt, chemical deposits and other explosive and aggressive media that seriously affect the insulation of the voltage regulator.
-There should be no serious vibration and bumps in the installation site.
-The waveform of the power supply voltage is similar to a sine wave.
-The three-phase power supply voltage is approximately symmetrical.


Technical Specifications:

Name

Single-phase contact type electric voltage regulator

Model

EP2J-50kVA

Rated Input voltage:

AC: 220V (single phase)

Output voltage:

AC0-240V

Output current:

208A

Frequency:

50-60Hz

Recommended lead cross-section mm2

50

Dimension

600(L)*600(W)*1500(H) mm

Weight

About 250kg


The following are some common products of EP2J series electric voltage regulators/Variable transformer produced by our company. Other special specifications are welcome to consult EP Hipot Electric.

Model

Output range(V)

Output current(A)

Product size L*W*H(cm)

EP2J-50KVA

0~250

200

63*60*150

EP2J -63KVA

0~250

252

120*70*170

EP2J -80KVA

0~250

320

120*70*170

EP2J -100KVA

0~250

400

120*70*170

EP2J -125KVA

0~250

500

120*70*170

EP2J -50KVA

0~430

67

63*70*170

EP2J -63KVA

0~430

84

63*70*170

EP2J -80KVA

0~430

107

120*70*170

EP2J -100KVA

0~430

134

120*70*170

EP2J -125KVA

0~430

168

120*70*170

EP2J -160KVA

0~430

215

150*120*170

EP2J -200KVA

0~430

269

150*120*170